SensorEOIRBand ============== .. py:class:: ansys.stk.core.stkobjects.SensorEOIRBand Class defining an EOIR band. .. py:currentmodule:: SensorEOIRBand Overview -------- .. tab-set:: .. tab-item:: Properties .. list-table:: :header-rows: 0 :widths: auto * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.band_name` - Get or set the name of the band. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.bit_depth` - Get or set the number of bits to encode the digital signal with. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.calculating_parameters` - Flag to set if input parameters are currently being calculated and entered into the object model. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.dark_current` - Get or set the dark current noise rate from the detectors in electrons-per-second-per-detector. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.detector_fill_factor` - Get or set the effective fill factor of photosensitive surface area to the total detector surface area. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.detector_full_well_capacity` - Get or set the full-well capacity of the detectors in electrons-per-detector. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.dynamic_range` - Get the ratio of the brightest signal to the noise floor. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.dynamic_range_mode` - Unlimited allowing pixels to measure any amount of radiant signal without limit or Simulate Saturation where pixels can only measure up to the specified saturation level of radiant signal. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.effective_focal_length` - Get or set the effective focal length of the current sensor band. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.entrance_prescription_diameter` - Diameter of the single lens equivalent optical prescription. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.f_number` - Get or set the F-Number ratio of the system, the effective focal length divided by the clear aperture diameter for this sensor band. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.high_band_edge_wavelength` - Get or set the cut-off spectral wavelength of the current sensor band at least one nanometer greater than the cut-on value. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.horizontal_half_angle` - Half the horizontal angular extent of the rectangular EOIR sensor bands field-of-view. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.horizontal_individual_field_of_view` - Get the horizontal angular extent of a single individual pixels field-of-view for this sensor band. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.horizontal_pixel_spacing` - Get or set the spacing between pixels or samples along the horizontal dimension of the rectangular EOIR sensor bands focal plane. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.horizontal_pixels` - Get or set the number of pixels or samples distributed evenly across the horizontal dimension of the rectangular EOIR sensor bands focal plane. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.image_quality` - Discrete level of optical image quality. Aberrations are modeled based on a RMS wavefront error. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.integration_time` - Get or set the time interval over which radiant signal is collected before generating an image. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.long_d_focus` - Get or set the amount of defocus along the optical axis between the ideal image focal plane and the actual detector focal plane for the current sensor band. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.low_band_edge_wavelength` - Get or set the cut-on spectral wavelength of the current sensor band at least one nanometer less than the cut-off value. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.noise_equivalent_irradiance` - Noise equivalent irradiance or radiance for the current sensor band. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.number_of_intervals` - Get or set the number of oversampled spectral intervals to discretely simulate for this sensor band. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.number_of_vertical_pixels` - Get or set the number of pixels or samples distributed evenly across the vertical dimension of the rectangular EOIR sensor bands focal plane. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.optical_automatic_rebalance` - Spatial parameter auto rebalance. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.optical_input_mode` - Optical parameter input mode. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.optical_quality_data_file_frequency_sampling` - Optical quality data file frequency sampling. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.optical_quality_data_file_spatial_sampling` - Optical quality data file spatial sampling. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.optical_quality_data_filename` - Optical quality describing data file. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.optical_transmission` - Band effective optical transmission. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.optical_transmission_mode` - Optical transmission input mode. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.optical_transmission_spectral_response_filename` - Optical spectral transmission data file. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.quantization_mode` - Quantization input mode. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.quantization_step_size` - Get or set the quantization step size of the digital output signal. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.quantum_efficiency_filename` - Spectral quantum efficiency data file for the detectors. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.quantum_efficiency_mode` - Quantum efficiency input mode. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.quantum_efficiency_value` - Band effective detector quantum efficiency. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.radiometric_parameter_level` - Radiometric parameter input level. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.read_noise` - Get or set the read noise from the detectors in electrons. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.render_band` - Band render flag. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.root_mean_squared_wavefront_error` - Get or set the RMS wavefront error of the optical system. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.rsr_units` - System custom RSR units. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.saturation_equivalent_irradiance` - Saturation equivalent irradiance or radiance for the current sensor band. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.saturation_mode` - Get or set the radiant energy units for saturation and sensitivity, Irradiance better suited for observing point sources or Radiance better suited for resolved images. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.saturations` - Get the collection of Saturation time-value pairs. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.sensitivities` - Get the collection of Sensitivity time-value pairs. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.simulate_quantization` - Simulate quantization effects of the sensor. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.spatial_auto_rebalance` - Spatial parameter auto rebalance. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.spatial_input_mode` - Spatial parameter input mode. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.spectral_shape` - Overall system spectral shape designation. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.system_relative_spectral_response_filename` - System relative spectral response file. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.vertical_extent_of_individual_pixel_field_of_view` - Get the vertical angular extent of a single individual pixels field-of-view for this sensor band. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.vertical_half_angle` - Half the vertical angular extent of the rectangular EOIR sensor bands field-of-view. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.vertical_pixel_spacing` - Get or set the spacing between pixels or samples along the vertical dimension of the rectangular EOIR sensor bands focal plane. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.wavelength` - Get or set the wavelength in the sensors spectral band to use for diffraction modeling calculations. * - :py:attr:`~ansys.stk.core.stkobjects.SensorEOIRBand.wavelength_type` - Get or set the relative position within the sensors spectral band to use as the reference wavelength for diffraction modeling calculations. Import detail ------------- .. code-block:: python from ansys.stk.core.stkobjects import SensorEOIRBand Property detail --------------- .. py:property:: band_name :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.band_name :type: str Get or set the name of the band. .. py:property:: bit_depth :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.bit_depth :type: int Get or set the number of bits to encode the digital signal with. .. py:property:: calculating_parameters :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.calculating_parameters :type: bool Flag to set if input parameters are currently being calculated and entered into the object model. .. py:property:: dark_current :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.dark_current :type: float Get or set the dark current noise rate from the detectors in electrons-per-second-per-detector. .. py:property:: detector_fill_factor :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.detector_fill_factor :type: float Get or set the effective fill factor of photosensitive surface area to the total detector surface area. .. py:property:: detector_full_well_capacity :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.detector_full_well_capacity :type: float Get or set the full-well capacity of the detectors in electrons-per-detector. .. py:property:: dynamic_range :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.dynamic_range :type: float Get the ratio of the brightest signal to the noise floor. .. py:property:: dynamic_range_mode :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.dynamic_range_mode :type: bool Unlimited allowing pixels to measure any amount of radiant signal without limit or Simulate Saturation where pixels can only measure up to the specified saturation level of radiant signal. .. py:property:: effective_focal_length :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.effective_focal_length :type: float Get or set the effective focal length of the current sensor band. .. py:property:: entrance_prescription_diameter :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.entrance_prescription_diameter :type: float Diameter of the single lens equivalent optical prescription. .. py:property:: f_number :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.f_number :type: float Get or set the F-Number ratio of the system, the effective focal length divided by the clear aperture diameter for this sensor band. .. py:property:: high_band_edge_wavelength :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.high_band_edge_wavelength :type: float Get or set the cut-off spectral wavelength of the current sensor band at least one nanometer greater than the cut-on value. .. py:property:: horizontal_half_angle :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.horizontal_half_angle :type: typing.Any Half the horizontal angular extent of the rectangular EOIR sensor bands field-of-view. .. py:property:: horizontal_individual_field_of_view :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.horizontal_individual_field_of_view :type: float Get the horizontal angular extent of a single individual pixels field-of-view for this sensor band. .. py:property:: horizontal_pixel_spacing :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.horizontal_pixel_spacing :type: float Get or set the spacing between pixels or samples along the horizontal dimension of the rectangular EOIR sensor bands focal plane. .. py:property:: horizontal_pixels :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.horizontal_pixels :type: float Get or set the number of pixels or samples distributed evenly across the horizontal dimension of the rectangular EOIR sensor bands focal plane. .. py:property:: image_quality :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.image_quality :type: SensorEOIRBandImageQuality Discrete level of optical image quality. Aberrations are modeled based on a RMS wavefront error. .. py:property:: integration_time :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.integration_time :type: float Get or set the time interval over which radiant signal is collected before generating an image. .. py:property:: long_d_focus :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.long_d_focus :type: float Get or set the amount of defocus along the optical axis between the ideal image focal plane and the actual detector focal plane for the current sensor band. .. py:property:: low_band_edge_wavelength :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.low_band_edge_wavelength :type: float Get or set the cut-on spectral wavelength of the current sensor band at least one nanometer less than the cut-off value. .. py:property:: noise_equivalent_irradiance :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.noise_equivalent_irradiance :type: float Noise equivalent irradiance or radiance for the current sensor band. .. py:property:: number_of_intervals :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.number_of_intervals :type: int Get or set the number of oversampled spectral intervals to discretely simulate for this sensor band. .. py:property:: number_of_vertical_pixels :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.number_of_vertical_pixels :type: float Get or set the number of pixels or samples distributed evenly across the vertical dimension of the rectangular EOIR sensor bands focal plane. .. py:property:: optical_automatic_rebalance :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.optical_automatic_rebalance :type: bool Spatial parameter auto rebalance. .. py:property:: optical_input_mode :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.optical_input_mode :type: SensorEOIRBandOpticalInputMode Optical parameter input mode. .. py:property:: optical_quality_data_file_frequency_sampling :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.optical_quality_data_file_frequency_sampling :type: float Optical quality data file frequency sampling. .. py:property:: optical_quality_data_file_spatial_sampling :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.optical_quality_data_file_spatial_sampling :type: float Optical quality data file spatial sampling. .. py:property:: optical_quality_data_filename :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.optical_quality_data_filename :type: str Optical quality describing data file. .. py:property:: optical_transmission :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.optical_transmission :type: float Band effective optical transmission. .. py:property:: optical_transmission_mode :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.optical_transmission_mode :type: SensorEOIRBandOpticalTransmissionMode Optical transmission input mode. .. py:property:: optical_transmission_spectral_response_filename :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.optical_transmission_spectral_response_filename :type: str Optical spectral transmission data file. .. py:property:: quantization_mode :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.quantization_mode :type: SensorEOIRBandQuantizationMode Quantization input mode. .. py:property:: quantization_step_size :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.quantization_step_size :type: float Get or set the quantization step size of the digital output signal. .. py:property:: quantum_efficiency_filename :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.quantum_efficiency_filename :type: str Spectral quantum efficiency data file for the detectors. .. py:property:: quantum_efficiency_mode :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.quantum_efficiency_mode :type: SensorEOIRBandQuantumEfficiencyMode Quantum efficiency input mode. .. py:property:: quantum_efficiency_value :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.quantum_efficiency_value :type: float Band effective detector quantum efficiency. .. py:property:: radiometric_parameter_level :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.radiometric_parameter_level :type: SensorEOIRBandRadiometricParameterLevelType Radiometric parameter input level. .. py:property:: read_noise :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.read_noise :type: float Get or set the read noise from the detectors in electrons. .. py:property:: render_band :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.render_band :type: bool Band render flag. .. py:property:: root_mean_squared_wavefront_error :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.root_mean_squared_wavefront_error :type: float Get or set the RMS wavefront error of the optical system. .. py:property:: rsr_units :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.rsr_units :type: SensorEOIRBandSpectralRelativeSystemResponseUnitsType System custom RSR units. .. py:property:: saturation_equivalent_irradiance :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.saturation_equivalent_irradiance :type: float Saturation equivalent irradiance or radiance for the current sensor band. .. py:property:: saturation_mode :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.saturation_mode :type: SensorEOIRBandSaturationMode Get or set the radiant energy units for saturation and sensitivity, Irradiance better suited for observing point sources or Radiance better suited for resolved images. .. py:property:: saturations :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.saturations :type: SensorEOIRSaturationCollection Get the collection of Saturation time-value pairs. .. py:property:: sensitivities :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.sensitivities :type: SensorEOIRSensitivityCollection Get the collection of Sensitivity time-value pairs. .. py:property:: simulate_quantization :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.simulate_quantization :type: bool Simulate quantization effects of the sensor. .. py:property:: spatial_auto_rebalance :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.spatial_auto_rebalance :type: bool Spatial parameter auto rebalance. .. py:property:: spatial_input_mode :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.spatial_input_mode :type: SensorEOIRBandSpatialInputMode Spatial parameter input mode. .. py:property:: spectral_shape :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.spectral_shape :type: SensorEOIRBandSpectralShape Overall system spectral shape designation. .. py:property:: system_relative_spectral_response_filename :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.system_relative_spectral_response_filename :type: str System relative spectral response file. .. py:property:: vertical_extent_of_individual_pixel_field_of_view :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.vertical_extent_of_individual_pixel_field_of_view :type: float Get the vertical angular extent of a single individual pixels field-of-view for this sensor band. .. py:property:: vertical_half_angle :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.vertical_half_angle :type: typing.Any Half the vertical angular extent of the rectangular EOIR sensor bands field-of-view. .. py:property:: vertical_pixel_spacing :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.vertical_pixel_spacing :type: float Get or set the spacing between pixels or samples along the vertical dimension of the rectangular EOIR sensor bands focal plane. .. py:property:: wavelength :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.wavelength :type: float Get or set the wavelength in the sensors spectral band to use for diffraction modeling calculations. .. py:property:: wavelength_type :canonical: ansys.stk.core.stkobjects.SensorEOIRBand.wavelength_type :type: SensorEOIRBandWavelengthType Get or set the relative position within the sensors spectral band to use as the reference wavelength for diffraction modeling calculations.