ProcedureHoldingFigure8#

class ansys.stk.core.stkobjects.aviator.ProcedureHoldingFigure8#

Class defining a holding figure 8 procedure.

Overview#

Methods

`get_as_procedure`	Get the procedure interface.
`get_minimum_width`	Get the minimum allowable width based on the aircraft’s minimum diameter at this altitude.

Properties

`altitude_options`	Get the altitude options.
`bearing`	Get or set the bearing of the holding point from the site.
`enroute_cruise_airspeed_options`	Get the enroute cruise airspeed options.
`enroute_options`	Get the enroute options.
`enroute_turn_direction_options`	Get the enroute turn direction options.
`hold_cruise_airspeed_options`	Get the hold cruise airspeed options.
`length`	Get or set the distance between the centers of the pattern’s arcs.
`level_off_mode`	Get or set the mode for the level off maneuver.
`profile_mode`	Get or set the mode defines how the aircraft will perform the holding pattern.
`range`	Get or set the distance to the holding point from the site.
`refuel_dump_mode`	Get or set the mode that defines when the aircraft will leave the holding pattern for a Refuel/Dump operation.
`turns`	Get or set the number of full turns.
`use_alternate_entry_points`	Get or set the option to enter the holding pattern from an alternate point.
`use_magnetic_heading`	Get or set the option to use a magnetic heading.
`width`	Get or set the width of the holding pattern.

from ansys.stk.core.stkobjects.aviator import ProcedureHoldingFigure8

property ProcedureHoldingFigure8.altitude_options: AltitudeMSLOptions#: Get the altitude options.

property ProcedureHoldingFigure8.bearing: Any#: Get or set the bearing of the holding point from the site.

property ProcedureHoldingFigure8.enroute_cruise_airspeed_options: CruiseAirspeedOptions#: Get the enroute cruise airspeed options.

property ProcedureHoldingFigure8.enroute_options: IEnrouteAndDelayOptions#: Get the enroute options.

property ProcedureHoldingFigure8.enroute_turn_direction_options: EnrouteTurnDirectionOptions#: Get the enroute turn direction options.

property ProcedureHoldingFigure8.hold_cruise_airspeed_options: CruiseAirspeedOptions#: Get the hold cruise airspeed options.

property ProcedureHoldingFigure8.length: float#: Get or set the distance between the centers of the pattern’s arcs.

property ProcedureHoldingFigure8.level_off_mode: AltitudeConstraintManeuverMode#: Get or set the mode for the level off maneuver.

property ProcedureHoldingFigure8.profile_mode: HoldingProfileMode#: Get or set the mode defines how the aircraft will perform the holding pattern.

property ProcedureHoldingFigure8.range: float#: Get or set the distance to the holding point from the site.

property ProcedureHoldingFigure8.refuel_dump_mode: HoldRefuelDumpMode#: Get or set the mode that defines when the aircraft will leave the holding pattern for a Refuel/Dump operation.

property ProcedureHoldingFigure8.turns: int#: Get or set the number of full turns.

property ProcedureHoldingFigure8.use_alternate_entry_points: bool#: Get or set the option to enter the holding pattern from an alternate point.

property ProcedureHoldingFigure8.use_magnetic_heading: bool#: Get or set the option to use a magnetic heading.

property ProcedureHoldingFigure8.width: float#: Get or set the width of the holding pattern.

ProcedureHoldingFigure8.get_as_procedure(self) → IProcedure#

Get the procedure interface.

ProcedureHoldingFigure8.get_minimum_width(self) → float#

Get the minimum allowable width based on the aircraft’s minimum diameter at this altitude.